Couldn't load pickup availability
Sea-Line MS POLYMER for sealing and bonding is UV-resistant and waterproof. Very good adhesion to many substrates/materials (GRP, wood, glass, metal, steel, aluminum, sealed and painted surfaces). The material can be painted over immediately after the skin has formed. Bonding reduces vibrations and therefore noise pollution. Free of solvents, silicones and isocyanates. Due to the large number of paint and coating systems on the market, preliminary adhesion tests are required. Pre-treatment may be necessary.
The LinRoc® POWER CAN is the highly developed and patented system for dispensing viscous, pasty and other difficult to dispense materials without smearing and leaving unusable residues - and all this without any presses or other tools!
If you have any further questions, please send us an email or call us at:
20 system: Maximum casting height of 20 mm
Processing time: 120 minutes
50 system: Maximum casting height of 50 mm
Processing time: 240 minutes
To determine how much CreativEpoxy needs to cover the specific surface, please refer to the table below.
Formula for calculating the amount of material:
Length x width x height (cm) / 1000 = material quantity in KG
Problem: The CreativEpoxy systems should be stored at temperatures between 10°C and 30°C. If the temperature is too cold, the A component may crystallize, which can lead to a milky appearance. In rare cases, the resin may also change from a liquid to a solid state.
Solution : Warm up the material in a closed container (approx. 40-50 degrees), e.g. in a water bath or oven. The material will become liquid or clear again. There is no need to worry about any reduction in quality!
The components should be mixed very thoroughly!
Pouring the mixture into a new, clean container and mixing again also reduces possible problems during curing.
Problem: During the curing time, ensure that the temperature and humidity (including air humidity) remain constant and protect! Excessive air humidity during curing can lead to a milky surface or a white film. The air humidity should be between 30 - 70%. Approx. 24 hours at 23 C°, sandable after approx. 48 hours, complete curing after 7 days.
Solution: Pour a new layer of resin or polish the surface.
Full curing is achieved after 7 days. We do not recommend sanding or polishing beforehand.
Tools can be cleaned with acetone or nitro thinner.
Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.
Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.
Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.
Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.
Since 2018, your expert in epoxy resin!
